• From preform to finished bottle are producing in one machine which saving space and time.
• Equip with core rods temperature control system makes finished bottle better. (optional)
• Precise and stable screw of neck
• Molding with multi-cavities per cycle. Suitable for large production.
• Automatic producing and no need to deflashing and trimming
• Unity-forming without seam
• Injection mold, blow mold, injection and plasticizing can be separately controlled, so shorter cycle time by rapidly processing.
• Machine is stable, low vibration and low noise.
• Independent electric control cabinet with dust-proof and waterproof design.
• Oil tank with filter and there is automatic oil constant temperature control system.

Available material: PE, PP, PS, PC, PET, PETG/PCTA, etc
Using on application of cosmetics, pharmacy, households, beverage and so on.

3 stations producing process:
Station 1: Injection to form parisons
Station 2: Blowing
Station 3: Stripping finished bottle

4 stations producing process:
Station 1: Injection to form parisons
Station 2: Blowing
Station 3: Stripping finished bottle
Station 4: Temperature adjustment of core rods

Suitable to make PET/PETG bottle under 100ml. Such as mascara, lip glossy, medical supplies and so on.
* Energy-saving model for optional

3 Stations

ITEM / MODEL
Screw diameter	mm	30	40	50	60	65	70
Injection volume	cm3/shot	70	150	235	508	660	961
Injection stroke	mm	100	120	120	180	200	250
Plasticizing rate	cm3/s	12	18	30	50	60	65
Screw L/D ratio		22	22	22	22	22	20
Preform clamp	kN	225	386	580	780	1060	1300
Blow mold clamp	kN	48	65	130	160	190	250
Max. Die. set	mm	300×300	470×330	620×400	750×400	900×400	1000x450
Trigger bar	mm	220	360	500	620	740	920
Dry cycle time	sec	2.8	3	3.2	3.8	4.2	4.5
Oil tank capacity	L	120	160	240	320	400	400
Power supply	kW	15	20	32	46	53	60
L × W × H	m	2.6×1.5×2.1	3×1.8×2.2	4×2×2.4	4.5×2.2×.2.6	5×2.4×2.7	5.5×2.6×2.7
Total Weight	ton	2.9	3.5	5	7	9	10

4 Stations

ITEM / MODEL
Screw diameter	mm	45
Injection volume	cm3/shot	190
Injection stroke	mm	120
Plasticizing rate	kg/hr	24
Screw L/D ratio		22
Preform clamp	kN	480
Blow mold clamp	kN	130
Press stroke	mm	125
Max. Die. set	mm	520 x 350
Trigger bar	mm	360
Dry cycle time	sec	3.5
Pump	kW	22
Hydraulic pressure	bar	170
Oil tank capacity	l	160
Low compressed air	bar	6~12
High compressed air	bar	20~30
Air consumption	l/min	500
Power supply	kW	32
Max. Length	m	4.2
Max. Width	m	1.8
Max. Height	m	2.4
Total Weight	ton	7

1. The material of mold is made of stainless steel to prevent rust pollution and corrosion.
2. The properties of mold are high hardness (52°HRC), high strength, high wear resistance and tough to extend the durability of mold.
3. Each cavity of mold is individual means easier to repair or dismantle.
4. Suitable for producing the bottle neck diameter from 6mm to 70mm.
5. Mold exchange can be finish within 3 hours
6. Position device of mold and mold base makes assembly faster and locate precisely.

The humanized operation control panel which combines the touch screen and operation bottoms can directly entering the control values

• The touch screen with graphical interface is easy-to-learn for user.
• Up to 10 steps of controlling and monitoring of injection, plasticizing, decompression, hold pressure.
• Decompression before and/or after plasticizing
• Real curve chart of producing. So, the engineer can fully control the producing situation.
• Integrated value monitor page.
• All parameters in real values
• Digital set points for all strokes, speeds, pressures and temperatures.
• Automatic failure detect and showing the abnormal message on touch screen
• Powerful memory function can save hundreds of memory of control values
• Slow mode for mold exchange, more safety and convenience.